Trade Show Display Glossary
Plain-English definitions of the terms you will see when you shop for trade show displays, with links to the products each term describes. For a step-by-step guide, see our trade show display buying guide.
Booth Sizes and Layouts
- 10x10 booth
- A 10ft wide by 10ft deep booth space, the most common size at North American trade shows. See 10x10 trade show displays.
- 10x20 booth
- A 20ft wide by 10ft deep space, also called a double inline booth. See 10x20 trade show booth displays.
- Inline booth
- A booth in a row of booths, open to the aisle on one side, with neighbors on the left and right.
- Corner booth
- An inline booth at the end of a row, open to two aisles.
- Peninsula booth
- A booth open to aisles on three sides, usually 20x20 or larger.
- Island booth
- A booth open to aisles on all four sides. See 20x20 trade show displays.
- Backwall
- The display along the back of an inline booth. It carries the main graphic visitors see from the aisle. See trade show backdrops.
Display Types
- Retractable banner stand
- A stand whose printed banner rolls into the base and pulls up onto a pole. Also called a roll-up or pull-up banner. See retractable banner stands.
- Non-retractable banner stand
- A banner stand where the graphic attaches to the frame instead of rolling into the base, such as X and L stands. See non-retractable banner stands.
- X banner stand
- A lightweight stand with crossed poles that hold the banner at its corners. See X banner stands.
- Tension fabric display
- A frame of aluminum tubes covered by a printed stretch fabric graphic that slides on like a pillowcase. See fabric tube displays.
- Pop up display
- A folding frame that expands into a backwall, with a fabric graphic attached. See portable trade show displays.
- Modular display
- A system of panels and connectors you can rearrange between shows and add to over time, often with shelves, counters or monitor mounts.
- Lightbox
- A frame with LED lights inside that light a fabric graphic from behind. See backlit displays and LED lightboxes.
- Backlit
- Lit from behind, so light passes through the graphic. Backlit graphics are printed on fabric made to let light through.
- Edge-lit
- A lightbox where the LEDs sit along the inside edges of the frame instead of behind the whole graphic.
- Truss display
- A booth structure built from aluminum truss sections, often used to hang graphics or lights. See trade show truss displays.
- Hanging banner
- An overhead sign suspended above a booth, in shapes such as circles, squares and triangles. Check the show rules before you order one. See trade show hanging banners.
- Display tower
- A freestanding fabric column used to mark a corner or an open side of a booth. See trade show towers.
- Step and repeat
- A backdrop printed with a repeating logo pattern, used for photos at events and press walls. See 10ft step and repeat displays.
Graphics and Printing
- SEG (silicone edge graphic)
- A fabric graphic with a thin silicone strip sewn around its edge. The strip pushes into a groove in the frame, so the graphic sits flat and tight.
- Dye-sublimation
- A printing method that uses heat to bond ink into polyester fabric, giving color that does not crack or peel.
- Graphic package
- A frame and its printed graphic sold together.
- Graphic only
- A replacement print for a frame you already own.
- Hardware only
- The frame or stand without a printed graphic.
- Single-sided / double-sided
- A single-sided display has a graphic on one face. A double-sided display has graphics on both faces, for displays seen from two directions.
- Bleed
- Extra artwork beyond the finished edge, so no blank edge shows after the graphic is trimmed or wrapped. See our graphic specifications.
- Vector file
- Artwork made of lines and shapes rather than pixels, so logos stay sharp at any size.
- PMS (Pantone) color match
- Printing a brand color to a specific Pantone reference so it matches your other materials.
- Proof
- A preview of your print file for you to approve before production. Every Capital Exhibits order gets a free graphic review.
Table Covers
- Table throw
- A loose cover that drapes over a table to the floor. See trade show table covers.
- Fitted table cover
- A cover cut to the shape of the table with boxed corners, for a tailored look. See fitted table throws.
- Stretch table cover
- A spandex-style cover that pulls tight over the table frame. See stretch table throws.
- 3-sided (open back)
- A table cover that leaves the back open so staff can reach supplies stored under the table.
- Table runner
- A narrow printed panel laid over a table cover. See table runners.
Show Logistics
- Advance warehouse
- A warehouse named by the show's contractor that accepts exhibitor shipments before the show and delivers them to your booth.
- Drayage (material handling)
- The show's fee for moving your shipment from the dock or warehouse to your booth.
- Exhibitor kit / manual
- The show's guide with deadlines, rules, shipping addresses and order forms for services such as electricity.
- Rush production
- Faster production for an extra charge when your show date is close. Rush options are available on many of our products.
Have a question we didn't cover? Read our FAQ or request a quote.
