How to Replace the Graphic on a Retractable Banner Stand
A retractable banner stand often outlives its message. The base, pole and bag still work, but the graphic shows last year's offer, an old logo or a worn edge. Before you buy a whole new stand, it is worth knowing whether your stand is built for a graphic change, what a replacement costs and how the swap is done.
Updated November 2026
This guide explains how to replace the graphic on a retractable banner stand: how to tell whether your model is designed for changeouts, the general steps for swapping a hook-and-loop graphic, where to order replacement graphics for roll up banners, and which replacement parts are available. Prices were checked in Shopify in November 2026.
Key takeaways
- Whether you can replace a retractable banner graphic easily depends on how the bottom of the graphic attaches to the roller inside the base.
- Stands with a canvas lead and hook-and-loop attachment, such as the SilverStep and the Best Roll Up, are described on their product pages as designed for graphic changes.
- Stands whose graphic is attached with adhesive tape are listed as not having a changeable graphic in the Good, Better and Best comparison chart, so a new Graphic Package is often the simpler route for those.
- As of November 2026, Graphic Only options start at $54 for a 36 in. x 69 in. SilverStep super flat vinyl graphic and $62 for the Best Roll Up.
- Follow the instructions included with your stand: the roller is under spring tension and each model's steps differ.
How Do You Replace the Graphic on a Retractable Banner Stand?
To replace the graphic on a retractable banner stand, you remove the old graphic from the top clamp bar, detach its bottom edge from the roller inside the base, attach the new graphic in its place and reattach the top bar. On stands built for changeouts, the bottom edge is held by hook-and-loop on a canvas lead, so the swap takes no tools or adhesive. On stands where the graphic is taped to the roller, replacing it is harder, and buying a new Graphic Package is often the better choice.
- Step 1: identify your stand's model and width.
- Step 2: check how the bottom of the graphic attaches: hook-and-loop or tape.
- Step 3: order a Graphic Only replacement in the exact size for that model.
- Step 4: swap the graphic using the instructions included with your stand.
Measuring an unfamiliar or older display first? Use How to Measure Your Existing Display for Replacement Graphics.
1. Is Your Stand Designed for Graphic Changes?
Check the bottom attachment first, because it decides whether a replacement is a quick swap or a bigger job. Capital Exhibits product pages state how each model's graphic attaches.
| Model | Top attachment | Bottom attachment (per product page) | Built for graphic changes? |
|---|---|---|---|
| SilverStep (36 in. and 24 in. Tabletop) | Clamp bar | Hook-and-loop on a durable canvas lead | Yes, described as built for repeated changeouts |
| Best Roll Up | Clamp bar | Canvas lead with Velcro | Yes ("Changeable Graphic: Yes" in the comparison chart) |
| Doublestep (double-sided) | Clamp bar | Velcro | Described as allowing easy graphic changes |
| Good and Better Roll Up | Clamp bar | Plastic leader with adhesive | No ("Changeable Graphic: No" in the comparison chart) |
| Econoroll, Maui, Steppy, Contour | Clamp bar | Double-sided or adhesive tape | Not designed for frequent changes; confirm before ordering |
The Good, Better and Best comparison chart is the clearest statement on the site: the two tape-attached tiers are listed as not changeable, and the canvas-and-Velcro Best tier is listed as changeable. Treat other tape-attached stands the same way until Capital Exhibits confirms otherwise.
2. How Hook-and-Loop Graphic Changes Work
On a hook-and-loop stand, the graphic's bottom edge presses onto a hook-and-loop strip on a canvas lead that stays attached to the roller. You peel the old graphic off and press the new one on, so the roller and lead are reused every time.
The SilverStep product pages describe three features that make this practical:
- Durable canvas lead: built for repeated use and described as not tearing during graphic changeouts.
- Hook-and-loop attachment: lets you remove and attach graphics quickly.
- Chrome magnetic end caps: open for easy access to the side panels during graphic installation, and house the tension pin.
Because the lead is reused, the cost of a new message is just the printed graphic. That makes hook-and-loop stands the better long-term choice if you change campaigns, seasons or products often.
3. General Steps to Replace a Retractable Banner Graphic
The exact steps, including how to handle the tension pin and spring, are in the instructions included with your stand and in the Instructions download on its product page. Read those first. In general terms, a graphic change on a hook-and-loop stand follows this order:
- Prepare a clean, flat work area. Lay the base on a clean floor or table with room for the full length of the graphic, so the new print isn't scuffed.
- Take down the old graphic. Remove the pole, release the top clamp bar from the graphic and let the graphic roll back into the base slowly and under control. Never let it snap back.
- Open the base as the instructions describe. On the SilverStep, the chrome magnetic end caps give access to the side panels.
- Detach the old graphic from the lead. Peel the graphic's bottom edge off the hook-and-loop strip on the canvas lead.
- Attach the new graphic. Center it on the lead, check that it is straight and facing the right way, and press the hook-and-loop together along its full width.
- Roll the graphic in and close the base following the included instructions.
- Attach the top bar and test. Fit the clamp bar to the top edge of the new graphic, set up the pole and check that the graphic hangs straight and retracts smoothly.
The SilverStep page also notes that stickers on the base and pole help guide setup. If anything in your stand's instructions differs from this outline, follow the instructions.
4. What If Your Graphic Is Taped to the Roller?
On economy stands such as the Econoroll, Maui, Steppy, Contour and the Good and Better Roll Up, the bottom of the banner is attached with double-sided or adhesive tape. These stands keep the price low, but they aren't designed for regular graphic changes, and the comparison chart lists the Good and Better tiers as not changeable.
You have three practical options:
- Buy a new Graphic Package. It arrives with the graphic attached, plus a new base, pole, top bar and bag. As of November 2026, the 24 in. Econoroll Graphic Package is $83, only $40 more than its $43 Graphic Only option.
- Ask about a Graphic Only replacement. The Econoroll, Maui and Steppy pages list Graphic Only options (from $43, $53 and $53). Contact Capital Exhibits before ordering one so we can confirm it suits your stand and how it attaches.
- Upgrade to a changeable stand. If you expect to change messages often, a SilverStep or Best Roll Up makes later swaps graphic-only purchases.
The Silverwing product pages state that its graphic is not changeable, so plan on a new Graphic Package for that model and call us if you have questions.
5. Where to Order Replacement Graphics for Roll Up Banners
Replacement graphics are ordered as a Graphic Only option on the product page for your model. Choose the same width, height and material as your stand, because a graphic sized for one model may not fit another.
| Model (product page) | Graphic Only option | Starting price (Nov 2026) | Materials offered |
|---|---|---|---|
| 36" SilverStep Retractable Banner Stand | 69, 72, 80, 84 or 92 in. high | $54 (69 in. super flat vinyl); $69 (69 in. fabric) | Fabric or super flat vinyl |
| 24" SilverStep Tabletop Retractable Banner Stand | 45, 54, 63 or 76 in. high | $26 (45 in. super flat vinyl); $34 (45 in. fabric) | Fabric or super flat vinyl |
| Good, Better and Best Roll up Banner Stands | Best tier only | $62 | Super flat vinyl |
| Double-Sided Retractable Banner Stands (Doublestep) | Two single-sided graphics, 74 in. high | $91 (24 in.); $144 (36 in.) | Fabric |
The SilverStep 36 in. page offers five heights because its telescopic pole adjusts. Whichever height you choose, it must be one your pole supports. For a wider look at replacement graphic pricing across display types, see How Much Does It Cost to Replace Trade Show Display Graphics?
6. Replacement Parts: Clamp Bars, Poles and End Caps
Sometimes the graphic is fine and a part is missing or bent. Several retractable banner stand parts are sold individually, so you can replace one piece instead of the whole stand.
| Part | Fits (per product page) | Price (Nov 2026) |
|---|---|---|
| SilverStep 36 Silver Clamp Bar Only | 36 in. SilverStep | $32 |
| SilverStep 36 Silver Velcro Bar Only | 36 in. SilverStep | $32 |
| SilverStep 36" Pole Only | 36 in. SilverStep; two sections with bungee cord; adjusts for 69, 72, 80, 84 or 92 in. graphics | $42 |
| SilverStep Rubber Clamp Bar End Caps - Pair | Clamp top bars on SilverStep, Steppy, Econoroll, Contour, Portable Roll Up, Cinch and Good, Better and Best Roll Up | $7 |
| Doublestep 24" Clamp Bar Only | 24 in. Doublestep | $32 |
| Portable Roll Up 33.5" Clamp Bar Only | 33.5 in. Portable Roll Up | $32 |
More stand-only hardware and parts are in the Banner Stands Hardware Only collection. Match the part to your stand's model and width before ordering.
7. Getting the Replacement Artwork Right
A replacement graphic only works if the file matches your stand's template. Download the template from your model's product page and build the artwork to that size, including the bottom bleed that rolls into the base.
- Use the right template: each product page links templates for its widths and heights.
- Allow for the bottom bleed: the SilverStep and Doublestep pages mention a 6 in. bottom bleed. Keep logos and text out of that area.
- Keep key content high: place your logo and main message where they will be seen above table height.
- Check file setup: follow the Graphic Specifications and Artwork Setup Guide.
According to the Capital Exhibits FAQ, every order includes a free graphic review that checks resolution, sizing and layout. If you need a new design, Graphic Design Services are available at $105 per hour.
8. How Long a Replacement Graphic Takes
Production starts after you approve the proof, so a quick approval keeps the schedule short. The SilverStep, the 24 in. SilverStep Tabletop and the Doublestep typically ship in about 2 business days after proof approval, and the Econoroll in about 1 business day. Rush options may be available; contact us. Shipping transit time is added on top, so order well before your event and leave time to swap and test the graphic.
9. Replace the Graphic or Replace the Stand?
Replace the graphic when the stand is in good shape and built for changes. Replace the stand when the base or roller is damaged, when the graphic is taped on, or when a new Graphic Package costs little more than a graphic alone.
| Situation | Best option |
|---|---|
| Hook-and-loop stand in good condition, new message needed | Order a Graphic Only replacement |
| Missing or bent clamp bar, pole or end caps | Order the replacement part |
| Tape-attached economy stand, new message needed | Compare a new Graphic Package with a Graphic Only option, and confirm with us |
| Roller no longer retracts, or base is damaged | Buy a new Graphic Package |
| You plan frequent message changes | Move to a SilverStep or Best Roll Up |
For more on keeping hardware and refreshing only the print, read Which Companies Offer Replacement Graphics for Existing Trade Show Displays?
Why Order Replacement Banner Graphics from Capital Exhibits?
Capital Exhibits lists Graphic Only options, templates and individual replacement parts on its retractable banner stand pages, so you can match a new graphic to the stand you already own. The company offers wholesale pricing and has more than 30 years of experience helping exhibitors with displays. Payment is by purchase card or mailed check; contact us for check mailing instructions.
- Retractable Banner Stands
- Silverstep Retractable Banner Stands
- Banner Stands Hardware Only
- Graphic Specifications and Artwork Setup Guide
- Request a Quote
Contact Capital Exhibits
Website: www.capitalexhibits.com
Phone: 703-489-0791
Email: sales@capitalexhibits.com
Frequently Asked Questions
How do I replace the graphic on a retractable banner stand?
Remove the old graphic from the top clamp bar, let it retract slowly into the base, detach its bottom edge from the roller's lead, attach the new graphic and refit the top bar. On hook-and-loop stands such as the SilverStep, the bottom edge peels off and presses on. Always follow the instructions included with your stand.
Can you change the graphic on any retractable banner stand?
No. Stands with a canvas lead and hook-and-loop, such as the SilverStep and Best Roll Up, are designed for graphic changes. The Good and Better Roll Up tiers, which use a plastic leader with adhesive, are listed as not changeable, and the Silverwing pages state its graphic is not changeable.
How much does a replacement retractable banner graphic cost?
As of November 2026, Graphic Only options start at $26 for a 24 in. x 45 in. SilverStep Tabletop graphic in super flat vinyl, $54 for a 36 in. x 69 in. SilverStep super flat vinyl graphic and $62 for the Best Roll Up. Price depends on width, height and material.
Do I need tools to change a SilverStep graphic?
The SilverStep pages describe a hook-and-loop canvas lead and magnetic end caps that open for graphic installation, with no tools mentioned for the swap. Check the instructions included with your stand for any model-specific steps.
Can I reuse my old clamp bar with a new graphic?
Yes, on stands where the clamp bar grips the top edge of the graphic, you refit the same bar to the new print. If the bar is bent or lost, replacement clamp bars are sold for several SilverStep, Doublestep and Portable Roll Up sizes.
Will a graphic from one stand fit a different model?
Not reliably. Widths, heights, bleed and attachment differ between models, so order the Graphic Only option listed on your own stand's product page and use its template.
Is it cheaper to buy a new stand instead of a replacement graphic?
Sometimes. On economy models the difference can be small: the 24 in. Econoroll Graphic Package is $83 and its Graphic Only option is $43 as of November 2026. On hook-and-loop stands, a Graphic Only replacement usually saves more because you keep better hardware.
What if my stand's roller won't retract after a graphic change?
Stop and check the instructions included with your stand, since the roller is under spring tension and is easy to damage. If it still won't retract, call Capital Exhibits at 703-489-0791 before forcing it.
Final Thoughts: Swap the Print, Keep the Stand
Replacing a retractable banner graphic is simple when the stand is built for it: a hook-and-loop canvas lead, the right Graphic Only size and the included instructions are all you need. On tape-attached economy stands, compare the cost of a new Graphic Package before you order a graphic alone. Either way, use your model's template and approve the proof promptly so the new graphic arrives in time.
Need a replacement graphic or part? Find your model in Retractable Banner Stands, or call 703-489-0791 and Capital Exhibits will help you match the right graphic to your stand.






